|
The electric energy
output by ultrasonic
generator to drives the
oscillators produce
ultrasonic energy, which
is then transferred to
the water inside the
vibration tank to play a
cleaning function. If
the ultrasonic energy
cannot be transmitted to
the water, it will cause
damage to the
oscillators. Therefore,
the following situations
must be avoided.
[1]Power
on while no water in the
vibration tank.
[2]Vigorously
stir the water in the
vibration tank. If find
that there is no
vibration wave in the
water because of this,
please turn off the
power and wait for 3~5
minutes before turning
the power back on.
[3]The
water contains too much
chlorine or other gases.
It also hinders the
transmission of
ultrasonic energy. It is
necessary to wait 15~30
minutes for the gas
content to drop before
turn on the power. |
